Connecting Solenzara so that Annapurna customers are uploaded to Solenzara

In the past, it was necessary to create the customer both in Annapurna and as a user in Solenzara.

You can now set Annapurna to upload all users with a email address to Solenzara. If the user has to be created then a default password of Welcome1 is used - you can amend this in Solenzara.

To do this, you need to make the correct settings for talking to the Solenzara web service are set.

Under Settings / Labname / Webservice/Address enter the web service for Solenzara eg

http://www(x).solenzara.co.uk/cgi-bin/lab name/slzws_simple_cgi.exe/soap/IProcessor

Replace www(x) with www, www2, www3 are appropriate
and lab name with the name of the lab as shown on the Solenzara site.

Under Settings / Labname / Webservice/User enter the Admin user name for Solenzara
Under Settings / Labname / Webservice/Password enter the Password user name for Solenzara.

If all is good then when you go into Annapurna customers there will now be a link at the bottom to allow the upload.