Tuesday, 25 March 2014

Kalahari - Wax Blocker

If the lab uses Wax for surface blocking then the restriction to prevent blocking ring being greater than the crib diameter can be dropped as the generator can cut into the wax.

There is a setting in Kalahari for this.


Monday, 24 March 2014

Orinoco - Younger and Zeiss

A quick note to let you know that semi-finished from these suppliers can be ordered through Orinoco program. 

In Orinoco program, go into the configure page and select Activate Supplier.  

Choose Younger and Zeiss.

When Orinoco is next started, they will appear in the supplier drop down list for you to select. On the first time, you have to enter your account number and password. If you are unsure of these then let us know.




Thursday, 20 March 2014

Serial Com Ports numbered > 16

There was a restriction on serial port number. This mean that devices (tracers, blockers, edgers) that were connected to a port numbered > 16 did not receive communication. This restriction has been lifted in new software released from now.

Wednesday, 19 March 2014

Connecting Solenzara so that Annapurna customers are uploaded to Solenzara

In the past, it was necessary to create the customer both in Annapurna and as a user in Solenzara.

You can now set Annapurna to upload all users with a email address to Solenzara. If the user has to be created then a default password of Welcome1 is used - you can amend this in Solenzara.

To do this, you need to make the correct settings for talking to the Solenzara web service are set.

Under Settings / Labname / Webservice/Address enter the web service for Solenzara eg

http://www(x).solenzara.co.uk/cgi-bin/lab name/slzws_simple_cgi.exe/soap/IProcessor

Replace www(x) with www, www2, www3 are appropriate
and lab name with the name of the lab as shown on the Solenzara site.

Under Settings / Labname / Webservice/User enter the Admin user name for Solenzara
Under Settings / Labname / Webservice/Password enter the Password user name for Solenzara.

If all is good then when you go into Annapurna customers there will now be a link at the bottom to allow the upload.




Friday, 14 March 2014

Wholesale Layout

Wholesale orders are printed using their own layout file but this was not accessible from the layout menu on the front screen. 

This oversight has now been corrected.

V2.56

Thursday, 13 March 2014

Tracking Sections - Having a different Name

Each lab has different conventions for the tracking points even if they do the same thing. 
If you want to change the name of a tracking section then you can achieve this by using the language files.

In the files\lang_files folder there is a file called

Default_Shared.lang

If it does not exist then open Notepad and save the file (please note it must not be saved with .txt extension).

Open the file with Notepad and enter a line

message_existing trackingname=newtracking name

eg

message_Customer_Services=Order Handling

Please note that any spaces in the existing name need to be replaced with _


Save the file and restart Annapurna.



Wednesday, 5 March 2014

Reprint Last Delivery Note

It can be that the delivery note is messed up or that certain customers want to have a second copy. In order to make life that little bit easier there is a button at the bottom of the individual complete order screen which will reprint the last delivery note.  

You can still get reprints by completing the order again.