In the lenspicker there is a filter box at the top and in here you can put part of the code or description eg Comfort and only lenses matching this will be shown.
If you do happen to know the code then in the filter at the top then you can force the software to exactly match this code by entering / followed by the lens code.
eg /PR24
You still need to click on the lens description shown to confirm this is the intended lens.
Friday, 28 June 2013
Thursday, 27 June 2013
Entering Tray numbers - force to be a certain number of characters.
In the settings editor, you can now specify a minimum length and a maximum length for the tray number. So if the trays are permanently marked in the range 1000 to 3000 then you can set the minimum and maximum length to 4. This will assist in stopping the wrong tray number being entered within Order Entry.
Tuesday, 25 June 2013
Remote Edging Charging.
Remote edging charges.
It is possible to apply a different
remote edging charge for different frame types. If the remote charge
is RE then Annapurna will look for a charge for RE+glazing charge
type code eg RENS or RSRL.
If the RENS or RSRL does not exist then
it will drop back to the standard RE charge.
Sunday, 23 June 2013
Backups
As the number of orders in Annapurna have increased (we have some customers with nearly two years of orders) then the back up time has lengthened.
In order to reduce this, we have introduced the concept of a full and partial backup. You will notice the backup question has now changed. The full backup runs as now and is the default on Fridays. The partial back up only differs with regards to orders ie it backs up everything as now except for the orders. Only the orders entered in the past 90 days are backed up in the partial backup.
Please note the Annapurna back up are NOT a substitute for arrange a proper backup on the server. This is the belt in "belt and braces", you should still organise the braces.
With the advent of cloud solutions such as dropbox, it is also a good idea to point the Annapurna backup at a dropbox (or equivalent) folder and then this will give security in the knowledge that this is backed.
We are currently looking at integrating a cloud backup which it is hoped to release shortly.
In order to reduce this, we have introduced the concept of a full and partial backup. You will notice the backup question has now changed. The full backup runs as now and is the default on Fridays. The partial back up only differs with regards to orders ie it backs up everything as now except for the orders. Only the orders entered in the past 90 days are backed up in the partial backup.
Please note the Annapurna back up are NOT a substitute for arrange a proper backup on the server. This is the belt in "belt and braces", you should still organise the braces.
With the advent of cloud solutions such as dropbox, it is also a good idea to point the Annapurna backup at a dropbox (or equivalent) folder and then this will give security in the knowledge that this is backed.
We are currently looking at integrating a cloud backup which it is hoped to release shortly.
Wednesday, 19 June 2013
Reject Reasons and Departments
Annapurna V2.19 and Kalahari
This list of available reasons and departments for rejects and returns has been extended.
The reporting of rejects has also been improved.
This list of available reasons and departments for rejects and returns has been extended.
The reporting of rejects has also been improved.
Tuesday, 18 June 2013
Charging for High Cyl and Outside Range Power.
There are two methods for calculation of the extra charge. In both methods, extra charges are created in the form of CYLxx where xx is the power.
Absolute Method.
This compares the value of the cylinder power with the maximum cyl and then applies the charge. So if the maximum cyl is 6.00 and the cylinder ordered is 7.00 then in the following list the CYL08 charge will apply.
CYL06 £xx.xx charge for cyls up to 6D
CYL08 £xx.xx charge for cyls up to 8D
CYL10 £xx.xx charge for cyls up to 10D
CYL99 £xx.xx charge for excessive cyl - always good to have this as the default.
Excess Method.
This will then charge the excess of the order cylinder over the maximum cyl. So if the maximum cyl is 6.00 and the cylinder ordered is 8.25 then the excess is 2.25 and then in the following list the CYL03 charge will apply.
CYL03 £xx.xx charge for extra cyls up to 3D
CYL06 £xx.xx charge for extra cyls up to 6D
CYL09 £xx.xx charge for extra cyls up to 9D
CYL99 £xx.xx charge for excessive cyl - always good to have this as the default.
Absolute Method.
This compares the value of the cylinder power with the maximum cyl and then applies the charge. So if the maximum cyl is 6.00 and the cylinder ordered is 7.00 then in the following list the CYL08 charge will apply.
CYL06 £xx.xx charge for cyls up to 6D
CYL08 £xx.xx charge for cyls up to 8D
CYL10 £xx.xx charge for cyls up to 10D
CYL99 £xx.xx charge for excessive cyl - always good to have this as the default.
Excess Method.
This will then charge the excess of the order cylinder over the maximum cyl. So if the maximum cyl is 6.00 and the cylinder ordered is 8.25 then the excess is 2.25 and then in the following list the CYL03 charge will apply.
CYL03 £xx.xx charge for extra cyls up to 3D
CYL06 £xx.xx charge for extra cyls up to 6D
CYL09 £xx.xx charge for extra cyls up to 9D
CYL99 £xx.xx charge for excessive cyl - always good to have this as the default.
The Absolute method is the default method. In order to switch to the Excess method then there is a setting "Pricing / High Cyl charge taken from excess power" which needs to be set.
The above also applies to the Outside range charge.
Monday, 17 June 2013
Frame Packages vs Complete Pricing
There are two distinct but similar methods for introducing special pricing for buying a glazed frame and lenses together.
Frame Package.
In this a total price is set for the combination of the lenses and the frame. A discount is added as a line to show the reduction from the regular price to the package price, ie the benefit of buying as a package. The package name is used as the description of the line item on the pricing.
Complete Pricing.
This is to encourage lens sales with the frame so when the frame is sold with lenses then the customer record is checked to see if there is a complete price list set. If there is then the lenses are then sold at the prices in the complete list. If there are not prices for the lens within the complete pricelist then the regular lens pricelist for the glazed lenses are applied. It is also possible to set different supplements for rimless and supra glazing within the complete pricelist.
Annapurna can support both but the Frame Package takes precedence over Complete Pricing.
Frame Package.
In this a total price is set for the combination of the lenses and the frame. A discount is added as a line to show the reduction from the regular price to the package price, ie the benefit of buying as a package. The package name is used as the description of the line item on the pricing.
Complete Pricing.
This is to encourage lens sales with the frame so when the frame is sold with lenses then the customer record is checked to see if there is a complete price list set. If there is then the lenses are then sold at the prices in the complete list. If there are not prices for the lens within the complete pricelist then the regular lens pricelist for the glazed lenses are applied. It is also possible to set different supplements for rimless and supra glazing within the complete pricelist.
Annapurna can support both but the Frame Package takes precedence over Complete Pricing.
Subscribe to:
Posts (Atom)