Charging for High Cyl and Outside Range Power.

There are two methods for calculation of the extra charge. In both methods, extra charges are created in the form of CYLxx where xx is the power.

Absolute Method.
This compares the value of the cylinder power with the maximum cyl and then applies the charge. So if the maximum cyl is 6.00 and the cylinder ordered is 7.00 then in the following list the CYL08 charge will apply.

CYL06    £xx.xx   charge for cyls up to 6D
CYL08    £xx.xx   charge for cyls up to 8D
CYL10    £xx.xx   charge for cyls up to 10D
CYL99    £xx.xx   charge for excessive cyl - always good to have this as the default.


Excess Method.
This will then charge the excess of the order cylinder over the maximum cyl.  So if the maximum cyl is 6.00 and the cylinder ordered is 8.25 then the excess is 2.25 and then in the following list the CYL03 charge will apply.

CYL03    £xx.xx   charge for extra cyls up to 3D
CYL06    £xx.xx   charge for extra cyls up to 6D
CYL09    £xx.xx   charge for extra cyls up to 9D
CYL99    £xx.xx   charge for excessive cyl - always good to have this as the default.

The Absolute method is the default method. In order to switch to the Excess method then there is a setting "Pricing / High Cyl charge taken from excess power" which needs to be set.

The above also applies to the Outside range charge.