Specifying Bevel Position in Annapurna

Information can be found here.Bevel Position 

Report on Override discount

 In the latest version of Annapurna (373.1) any orders that have a manual discount specified will be recorded for reporting.  

There is a new report, number 42, in the other reports area which will inform on the accounts, the discount applied, the reason and the user that entered the discount.

Rx Cards by design

 It is now possible to have Rx cards by Design.

The layout files for RX card in the layout_files folder need to be copied to RXCard_lensdesign where lensdesign is the design as set in the lenses csv file.

The layout manager can then be used to create a bespoke layout for this design,

VCATracer - Transfer to a new PC.

 

Moving VCAtracer settings and traces to a new PC.

These instructions are for moving the VCATracer settings and traces to another PC.

Saving the Settings, Configuration and Traces.

On the PC, navigate to the “My Documents” folder. In this folder, there is a folder called Solenzara. Copy this folder to a USB memory stick or another location that can be accessed from the new PC.

Restoring the Settings, Configuration and Traces.

On the new PC, install VCATracer via the download from Solenzara. This will create a Solenzara folder in “My Documents”.

Close down VCATracer.

Copy the saved Solenzara folder from the saved location into the “My Documents” folder on the new PC. This will overwrite some of the recently installed contents. This is OK.

Checking the configuration.

Restart the VCATracer software and confirm that the traces are now available. If the tracer is connected via serial then the port number that is being used on the new PC needs to be established and the new port number entered into the VCATracer software. If USB drivers are being used then these need to be installed on the PC.

Multiple Users.

Please note, if there are multiple users configured on the old PC then the Solenzara folder may be in “Public Documents”. If this is the case then amend the instructions above accordingly.